i2C FACE ID V8 Programmer Fixture for iPhone X/XS/XsMax/XR/11/11Pro/11ProMax/12/12Pro/12Mini/12ProMax-Cable for iPhone Xs Max
Description:
This is a brand new high quality i2C FACE ID V8 Programmer Fixture for iPhone X/XS/XsMax/XR/11/11Pro/11ProMax/12/12Pro/12Mini/12ProMax-Cable for iPhone Xs Max
Features
1. Offline read & write
2. Support models: For iPhone X/XR/XS/XS Max/11/11 Pro/11 Pro Max/12/12Pro/12Mini/12ProMax
3. Support Chinese & English menu switch
4. Non-trace repair, green pass the 3UTools
5. Chip non-removal low repair risk
6. Low power consumption and no current leakage
7. Can be adapted to the latest iOS system perfectly
Operation Process
1. Connect with the original flex cable, press the ‘Test’ button to test the flex cable condition
2. Press the ‘Read’ button to read and save the data (Do not power off during the operation process to avoid loss of data )
3. Connect the i2C dot projector flex cable with the host machine, then press the ‘Write’ button to write the data. (Do not power off during the operation process to avoid loss of data)
4. Cut off the shielding cover soldering joint pads with grinding pen
5. Heat with a hot air gun and separate the dot projector board from the glass lens with a sculpture knife
6. Take down the MOSFET then short the pin as shown in the figure
7. Reball the pads on the flex cable
8. Apply solder paste then solder the dot projector board to the flex cable
9. Test the flex cable working condition after the soldering
10. Put the flex cable into the shielding cover and keep the flex well aligned with the glass lens
Warranty:
Parts4Cells stands by the quality of its products by offering Life Time Warranty.
